Factory direct sale anti-mold quick-drying cold room sealant

Cool Room Sealant is a one-component, non-drying, polybutene rubber based mastic that does not harden but rather remains paste-like permanently soft. It has excellent resistance to water vapor transmission.

Product name	weight	shelf life	material	content
Cold room sealant	0.465KG	12 month	silicone	300ml

Applications: 

Well-suited for sealing cold room and other pre-fabricated construction applications. Ideal for sealing most plastics, metals, glass, masonry, and wood.

◆Preparation

Clean the surfaces by removing the rust, ash, and oil, etc. 

◆Application

Pierce the opening with the tip of the cap. Fix the nozzle, and coat the surface evenly with the adhesives, then assemble two parts.

◆Curing Condition

Put the surfaces in air to make it get full cure. The curing progress is from outer surface into inner surface. The elastomer can get cure with the depth of 2~4mm in 24 hours (at room temperature, 55% moisture), if the sections is too deep (especially the parts not easy to contact with air) or the temperature is too low, the cure time will be extend. Advise users preparing enough time to let elastomer get full cure in order to stable its properties before the next disposing or packaging.

◆Attention

1. After the application, screw its nozzle tightly and store in dry and cool place for next time using.
2. Some cured adhesives around the opening when you use it again, just remove the cured, and use the uncured.